How to select the truck tail lift?

There are many brands and models of truck Tail Lift, and the quality and price on the market are mixed. For ordinary consumers, it is difficult to choose a tail lift with good quality and low price that is suitable for their own enterprises. Next, NEUNE, the truck tail lift manufacturer, will talk about how to select the truck tail lift.

First of all, we should know the model of the vehicle with tail lift, the size of the compartment and the type of tail lift. There are three types of tail lift: cantilever type, vertical type and folding type. After selecting the type, it depends on the parameters. Three important parameters of the tail lift are load, panel size and load center, as follows:

1. Load:

Choose the truck tail lift load parameters, which tend to be larger than the actual cargo weight. For example, if the cargo weight is 1.1 tons, choose 1.5 tons instead of 1.5 tons. Although it can be used, it will increase the pressure of the truck tail lift oil cylinder. The load of the tail lift is generally 1.2 times of the rated load. When your budget is limited and you will not exceed the rated load for a long time, you can choose a vehicle model that is equal to or less than the cargo weight. If the cargo is 1.3 tons, 1.5 tons can be selected. It is easier to be big than small.

2. Load center:

The rated load refers to the weight within the load center. When the center of gravity of the cargo is outside the load center, the load will drop, and the rated load cannot be raised. The load center of the automobile tail lift is 600mm from the root of the tail lift panel. Only at this point and center can the tonnage marked on the tail lift be loaded. Therefore, the cargo can be placed as close to the root of the panel as possible, without overloading.

3. Panel width selection:

It is good to match the outside width of the car, which is between 10mm and 10mm. The length of the tail lift is generally longer than the length of the goods or pallet, and cannot be shorter than the length of the goods or pallet by 100mm, otherwise it will slide off the storage space. Now the tail lift manufacturer generally configures 1.8 meters as standard, and can make it to order if necessary.

Secondly, the quality and price of the market tail lift are uneven. Niuli Machinery suggested that the brand should be determined first, then the type and parameters should be selected, and then the price should be appropriate. Of course, after-sales service is also important reference information.

NEUNE, the truck tail lift manufacturer, has developed and manufactured various warehousing and logistics handling equipment, including automobile tail lift, carriers, lifting trucks, pallet adjustment plates, oil bucket trucks, boarding bridges, lifting elevators, storage lifting platforms, etc. The products are strictly controlled at all levels from design, production, assembly and testing to installation and sales. As for the tail lift of which structure to choose, truck drivers can choose according to their own vehicle conditions and the advantages and disadvantages of various structures.