Manual Lifting Fork Truck Traveling Wheel Selection

The main difference between the polyurethane walking wheel and the rubber walking wheel of the forklift truck raised manually is that the soft and hard of the walking wheel are different. The polyurethane walking wheel and rubber walking wheel are suitable for different use needs in different industries.

The unique soft characteristics of the rubber walking wheel of the manual forklift are more suitable for strict requirements on the ground flatness to prevent the ground from being crushed by the reciprocating contact with the ground during the moving and carrying of heavy objects by the manual forklift.

In addition, the rubber walking wheel has soft texture and better silence when moving. This type of manual hydraulic vehicle can be used in laboratories or scientific research rooms where there are special requirements for indoor operation noise.

The rubber walking wheel of the manual carrier may be oxidized after a period of use. After oxidation, the adhesive around the rubber wheel will melt slightly. However, the polyurethane walking wheel will only turn yellow, but the material performance will not change.

Once the rubber walking wheel of the manual forklift is melted and sticky, the normal use of the manual forklift will be affected, or the following two types of use confusion will occur

1. The places where the hydraulic forklift truck carries heavy objects will leave rubber marks on the wheels and dirty the ground.

2. Once the rubber traveling wheel of the forklift is sticky, the material hardness of the manual forklift traveling wheel will be affected.

The nylon walking wheel of manual forklift has the following characteristics and advantages, which are well known to the public. In addition to the manual lifting of polyurethane walking wheels for forklifts, nylon walking wheels are widely used.

The nylon walking wheel has sufficient mechanical strength, high flexibility, and strong tensile and compressive properties. Smooth surface, small friction coefficient, wear resistance, corrosion resistance, high temperature resistance and strong fatigue resistance.

We provide rotation customization service:

The wheels are available in three types: nylon, rubber and PU, which can be selected according to the use position of the Buyer; Rubber wheels are suitable for smoking or rough floors, quiet and durable. Nylon, low resistance, suitable for food processing, chemical industry and fishery; PU, wear-resistant, traceless, quiet and durable.